How to change the oil filter and engine oil
How to replace the oil and engine oil filter in a BMW. Step by step guide.
Basic car maintenance is crucial to keeping it running smoothly and efficiently. One important aspect is the regular replacement of engine oil and oil filter. In today's post you will learn how to replace the oil filter and engine oils in your BMW yourself.
Why is an oil change important for your BMW?
Changing engine oil is a key part of regular car maintenance, especially for a BMW. Fresh oil keeps your engine in top condition by protecting it from wear and deposits. It is recommended to change the oil regularly in accordance with the manufacturer's recommendations to guarantee optimal engine performance and life.
Which engine oils are suitable for BMW?
Before changing your oil, check what type of oil is recommended by the manufacturer of your specific BMW model. When choosing the right engine oil, make sure it meets the manufacturer's recommended specifications, including parameters such as viscosity and quality standards, to choose the right oil for your car, we recommend reading our last entry on this topic.
Replacing the oil filter in BMW – step by step
1). Raise the front of the car and secure it with wheel chocks or wheel locks.
2). Locate the oil filter - it is usually located on the front or side of the engine.
3). Remove the old oil filter, avoiding spilling oil on surrounding components.
4). Unscrew the oil drain plug from the engine and drain the used oil
5). Install a new oil filter according to the manufacturer's recommendations.
6). Apply a thin layer of oil to the rubber seal of the new filter.
Changing engine oil – step by step
1). Open the oil fill cap and remove the oil drain plug.
2). Place a special funnel in the filler hole and pour new oil according to the manufacturer's recommendations.
3). Close the oil filler cap and check the oil level with the dipstick, or in new models, measure the oil level using the vehicle's onboard computer.
4). Run the engine for a few minutes to allow the new oil to distribute.
5). Check the oil level again and adjust if necessary.
Summary
Changing your engine oil and oil filter regularly is crucial to keeping your BMW in great condition. By following the guide above, you can perform this maintenance yourself, saving time and money. Remember, however, that if you don't feel confident, you can always use the services of a professional car repair shop.
Leave a comment
Log in to post comments